You are browsing the Blog for Audi A4 Archives - Page 2 of 2 - Audi How To.

Next Entries →
by admin

Audi A4 B5 (1994 to 2001) Fuses List and Amperage

August 22, 2016 in Audi A4, Audi A4 B5 (1994 to 2001) by admin

audi_a4_b5_fuse_box_locationFuse box location

The Audi A4 B5 fuse box is located on the left side of the dashboard (see image on the right).
To access it you must have the left hand side door open and remove the side dash cover, pushing it.

Fuxe box diagram and amperage list

audi a4 b5 fuses location on fuse boxCheck fuses position on the image

Fuse number – Description – Fuse Amperage

1 – Heated washer jets – 5A
2 – Turn signals flasher unit – 10A
3 – Headlight washer, illumination of glove compartment, engine compartment, climate control, automatic transmission, instrument cluster – 5A
4 – License plate light – 5A
5 – Instrument cluster, seat heating, test connection for cruise control, bulb monitor for auto-check control, Automatic transmission display, switch lighting, mirror switches and actuators, airbag warning light, outside temperature indicator, Climate control – 10A
6 – Central locking system – 5A
7 – Anti-lock brake system – 10A
8 – Empty
9 – Mirror heating – 10A
10 – Empty
11 – Cruise control (automatic transmission) – 5A
12 – On board diagnostic system – 10A
13 – Brake lights – 10A
14 – Interior lights, reading lights, anti-theft alarm system, vanity mirror – 10A
15 – Instrument cluster, power windows, climate control, automatic transmission – 10A
16 – Anti-lock brake system, Anti-Slip-Regulation – 5A
17 – Heated door locks – 10A
18 – High beam right – 10A
19 – High beam left – 10A
20 – Low beam right – 15A
21 – Low beam left – 15A
22 – Tail and side marker right – 5A
23 – Tail and side marker left – 5A
24 – Wiper and washer system – 25A
25 – Blower for heating, climate control – 30A
26 – Rear window defogger, mirror heating – 30A
27 – Rear window wiper – 15A
28 – Fuel pump – 15A
29 – Engine timing – 20A
30 – Sun roof – 20A
31 – Tail lights, cruise control, automatic transmission – 15A
32 – Engine timing – 20A
33 – Cigarette lighter – 15A
34 – Engine timing – 15A
35 – Trailer receptacle – 30A
36 – Fog lights – 15A
37 – Radio – 20A
38 – Luggage compartment light, central locking system – 15A
39 – Emergency flasher – 15A
40 – Horn – 25A
41 – Anti-lock brake system – 25A
42 – Empty
43 – Empty
44 – Seat heating – 30A

 

The instructions in this tutorial will work in the following model years:

1994, 1995, 1996, 1997, 1998, 1999, 2000 and 2001 Audi A4 B5 Petrol (1.6, 1.8, 1.8T, 2.4 v6, 2.8 v6) and Diesel (1.9 TDI and 2.5 TDI) Engines, S4 and RS4

No Comments »

by admin

How to find Audi engine code

March 2, 2016 in Audi A3 8L (1996 to 2003), Audi A4 B5 (1994 to 2001), Audi A4 B6 (2000 to 2006), Audi A6 C5 (1997 to 2005), Audi A6 C5 Allroad Quattro (1999 to 2005), Audi A8 D2 (1994 to 2002), Audi A8 D3 (2002 to 2010), Audi TT 8N (1998 to 2006), Generic How To's by admin

When you are searching for something to your cas, sometimes it’s usefull to know what is the code of the engine.

You have two options to easily retrieve the engine code of your car:

1. Look in your service book. On the first you’ll have a black and white sticker.
2. Look in your spare tyre well, and you’ll find the same black and white sticker.

how to find audi engine code

This sticker have severall information regarding your car (engine code, gearbox code,  paint code, trim code and all the option codes).

The engine code is the first information on the 4th line (highlighted in red in the image  on the left).

 

No Comments »

by admin

2001, 2002, 2003 – Audi A3, A4, A6, A8, TT, Allroad – Petrol Engines – Scheduled Plan

February 17, 2016 in Audi A3 8L (1996 to 2003), Audi A4 B6 (2000 to 2006), Audi A6 C5 (1997 to 2005), Audi A6 C5 Allroad Quattro (1999 to 2005), Audi A8 D2 (1994 to 2002), Audi A8 D3 (2002 to 2010), Audi TT 8N (1998 to 2006), Scheduled Service / Maintenance Plans by admin


All you need to know to service your 2001, 2002, 2003 Audi A3, A4, A4 Cabrio, A6, A8, TT, TT Cabrio S4, S6, S8, A6 AllRoad (including Avant body type and Quattro transmissions) with Petrol engines – 1.6, 1.8, 1.8T, 2.0, 2.4L V6, 2.7L V6, 2.8L V6, 3.0L V6 and 4.2L V8 – according to the Official Audi Scheduled Service Plan / Servicing Plan / Maintenance Plan.

This guide is for Petrol engines ONLY produced in years 2001, 2002 and 2003. For other engines, models or years, click here.

All the information in this article is in accordance with the Servicing Schedule Plan specified by Audi. Nevertheless, you should allways confirm with your car owners manual before any servicing.

Every 15.000 kms / 10.000 miles schedule service interval:

1. Change engine oil and oil filter
2. Cooling system – Check level and re-fill if necessary
3. Exhaust System – check for damage and leaks
4. Engine OBD – Check existing errors and act accordingly. Reset after checking.
5. Door Hinge Mechanisms – lubricate
6. Battery – check electrolyte and re-fill if necessary
7. Wiper/Washer – check fluid and re-fill if necessary
8. Automatic Shift Lock – check
9. Manual Transmission – check shift and interlock
10. Tires and Spare – check condition and pressure
11. Reset the Service Reminder Indicator
12. Check brake pads and brake discs wear
13. Drive Shaft Boots – check condition
14. Exterior lights: Check all lights and replace if needed.

Aditionally, every 30.000 kms / 20.000 miles schedule service interval:
1. Engine – check for oil and coolant leaks
2. Front Axle – check dust seals, ball joints, tie-rod ends
3. Automatic Transmission – check for leaks
4. Automatic Transmission Final Drive – check for leaks
5. Manual Transmission – check for leaks
6. Manual Transmission Final Drive – check for leaks
7. Dust and Pollen Filter – replace
8. Headlights – inspect and adjust if necessary
9. Sliding Roof – clean and lubricate rails
10. If TT / A3 Quattro – Haldex Clutch, change oil and filter

Aditionally, every 60.000 kms / 40.000 miles schedule service interval:
1. Multitronic™ Transmission – change ATF
2. Power Steering Fluid – check, add if necessary
3. Spark Plugs – replace
4. Air Cleaner – replace filter element, clean screen

Aditionally, every 120.000 kms / 80.000 miles schedule service interval:
1. Auxiliary Belt – replace

Aditionally, every 150.000 kms / 100.000 miles schedule service interval:
1. Timing Belt and Tensioner Roller – replace

Aditionally, every two years, regardless of mileage:
1. Brake Fluid
2. If Cabrio Cloth top – check rollover function


This maintenance plan is suitable for the following model years:

– Audi A3 (8L), A4 (B6) 1.6 made / sold in 2001, 2002, 2003
– Audi A3 (8L), A4 (B6), A6 (C5) 1.8 made / sold in 2001, 2002, 2003
– Audi A3 (8L), A4 (B6), A6 (C5), TT (8N) 1.8T made / sold in 2001, 2002, 2003
– Audi A4 (B6), A6 (C5) 2.0 made / sold in 2001, 2002, 2003
– Audi A4 (B6), A6 (C5) 2.4 V6 made / sold in 2001, 2002, 2003
– Audi A6 (C5) 2.7T V6 made / sold in 2001, 2002, 2003
– Audi A6 (C5) 2.8 V6 made / sold in 2001
– Audi A4 (B6), A6 (C5), A8 3.0 V6 made / sold in 2001, 2002, 2003
– Audi A8 3.7 V8 made / sold in 2001, 2002, 2003
– Audi A4 (B6) S4, A6 (C5), S6 (C5), A8 4.2 V8 made / sold in 2001, 2002, 2003

No Comments »

by admin

Audi A4 B5 Torque Specs (1994 to 2001)

April 23, 2015 in Audi A4, Audi A4 B5 (1994 to 2001) by admin

List of Audi A4 B5 (1994 to 2001) FWD and AWD (Quattro) bolts and nuts tightening torque specifications.

Cautions:
– Screws coated with locking fluid or sealant must always be replaced with new screws during reinstallation.
– Screws coated with a locking fluid or self locking nuts must be replaced with new when reinstalled.
– Always use new screws and nuts when angle tightening. Any exceptions to this rule will be indicated in the method.
– Only nuts and screws which are not self locking can be reused provided that they are in good condition.

FRONT Clamp Bolts – Anti Roll/Stabilizer Bar To Subframe (Hexagon Bolt) :
18 Ft-Lbs \ 216 In-Lbs \ 24.4 N-m

REAR – AWD – Bushing Clamp Bolts – Anti Roll/Stabilizer Bar To Subframe (Bolt – Nut) :
18 Ft-Lbs \ 216 In-Lbs \ 24.4 N-m

REAR – 2WD – Pivot Bolts :Axle Beam To Mount (Bolt – Nut) :
59 Ft-Lbs \ 708 In-Lbs \ 79.99 N-m + 90deg

FRONT LOWER Ball Joint Nut :Ball Joint To Steering Knuckle (Nut) :
74 Ft-Lbs \ 888 In-Lbs \ 100.33 N-m

FRONT UPPER Ball Joint Clamp Nut & Bolt :Ball Joint To Steering Knuckle (Bolt – Nut) :
30 Ft-Lbs \ 360 In-Lbs \ 40.67 N-m

AWD – Drive Shaft Bearing Bracket Nuts :Bracket/Stay To Floor Pan (Nut) :
18 Ft-Lbs \ 216 In-Lbs \ 24.4 N-m

FRONT Guide Pins – Lucas :Caliper To Caliper Mounting Bracket :
22 Ft-Lbs \ 264 In-Lbs \ 29.83 N-m

FRONT Guide Pins – Teves/Ate :Caliper To Caliper Mounting Bracket :
18 Ft-Lbs \ 216 In-Lbs \ 24.4 N-m

REAR Guide Pins :Caliper To Caliper Mounting Bracket :
26 Ft-Lbs \ 312 In-Lbs \ 35.25 N-m

FRONT :Caliper Mounting Bracket To Steering Knuckle (Hexagon Bolt) :
92 Ft-Lbs \ 1104 In-Lbs \ 124.74 N-m

REAR :Caliper Mounting Bracket To Rear Knuckle (Hexagon Bolt) :
70 Ft-Lbs \ 840 In-Lbs \ 94.91 N-m

Clutch Master Cylinder To Firewall (Allen Bolt) :
15 Ft-Lbs \ 180 In-Lbs \ 20.34 N-m

Clutch Release Cylinder To Transaxle (Hexagon Bolt) :
18 Ft-Lbs \ 216 In-Lbs \ 24.4 N-m

FRONT (Front Arm Pivot) :Control Arm-Lower To Subframe (Bolt – Nut) :
59 Ft-Lbs \ 708 In-Lbs \ 79.99 N-m + 90deg

FRONT (Rear Arm Pivot) :Control Arm-Lower To Subframe (Bolt – Nut) :
66 Ft-Lbs \ 792 In-Lbs \ 89.48 N-m + 90deg

REAR LOWER – AWD – NOTE :52 FtLbs :Control Arm-Lower To Subframe (Bolt – Nut) :
52 Ft-Lbs \ 624 In-Lbs \ 70.5 N-m + 90deg

REAR LOWER – AWD :Control Arm-Lower To Rear Knuckle (Bolt – Nut) :
70 Ft-Lbs \ 840 In-Lbs \ 94.91 N-m

REAR – AWD – Pivot Bolts :Control Arm-Upper To Subframe (Bolt – Nut) :
37 Ft-Lbs \ 444 In-Lbs \ 50.17 N-m + 90deg

FRONT Pivot Bolt :Control Arm-Upper To Mount (Bolt – Nut) :
30 Ft-Lbs \ 360 In-Lbs \ 40.67 N-m + 90deg

REAR – AWD :Control Arm-Upper To Rear Knuckle (Bolt – Nut) :
37 Ft-Lbs \ 444 In-Lbs \ 50.17 N-m + 90deg

REAR – 2WD :Damper Mounting Plate To Body (Hexagon Bolt) :
18 Ft-Lbs \ 216 In-Lbs \ 24.4 N-m

FRONT LOWER to Lower Control :Damper/Shock Absorber To Control Arm-Lower (Bolt – Nut) :
66 Ft-Lbs \ 792 In-Lbs \ 89.48 N-m

REAR – AWD :Damper/Shock Absorber To Control Arm-Lower (Bolt – Nut) :
52 Ft-Lbs \ 624 In-Lbs \ 70.5 N-m + 90deg

REAR LOWER – 2WD :Damper/Shock Absorber To Trailing Arm (Bolt – Nut) :
37 Ft-Lbs \ 444 In-Lbs \ 50.17 N-m + 90deg

FRONT Damper Shaft Nut :Damper/Shock Absorber To Damper Mounting Plate (Nut) :
44 Ft-Lbs \ 528 In-Lbs \ 59.66 N-m

FRONT UPPER to Control Arm Mounting Bracket :Damper/Shock Absorber To Mount (Nut) :
15 Ft-Lbs \ 180 In-Lbs \ 20.34 N-m

REAR – AWD – UPPER :Damper/Shock Absorber To Mount (Bolt – Nut) :
52 Ft-Lbs \ 624 In-Lbs \ 70.5 N-m + 90deg

REAR UPPER – 2WD – Damper Shaft Nut :Damper/Shock Absorber To Mount (Nut) :
18 Ft-Lbs \ 216 In-Lbs \ 24.4 N-m

AWD – Front Cross Member :Differental Assembly To Differential Crossmember (Hexagon Bolt) :
30 Ft-Lbs \ 360 In-Lbs \ 40.67 N-m

AWD – Rear Cross Member :Differental Assembly To Differential Crossmember (Hexagon Bolt) :
41 Ft-Lbs \ 492 In-Lbs \ 55.59 N-m

REAR – AWD :Differential Crossmember To Body – 8mm bolts (M 8 X 1.25 Hexagon Bolt) :
17 Ft-Lbs \ 204 In-Lbs \ 23.05 N-m

REAR – AWD :Differential Crossmember To Body – 10mm bolts (M 10 X 1.50 Hexagon Bolt) :
30 Ft-Lbs \ 360 In-Lbs \ 40.67 N-m

MANUAL Transaxle Drain Plug :Drain Plug To Transaxle (Hexagon Bolt) :
26 Ft-Lbs \ 312 In-Lbs \ 35.25 N-m

REAR Inner CV Joint :Drive Axle To Differental Assembly (M 8 X 1.25 Allen Bolt) :
30 Ft-Lbs \ 360 In-Lbs \ 40.67 N-m

FRONT Inner CV Joint – Ball & Cage :Drive Axle To Transaxle (M 10 X 1.50 Allen Bolt) :
59 Ft-Lbs \ 708 In-Lbs \ 79.99 N-m

FRONT Inner CV Joint – Ball & Cage :Drive Axle To Transaxle (M 8 X 1.25 Allen Bolt) :
30 Ft-Lbs \ 360 In-Lbs \ 40.67 N-m

FRONT Inner CV Joint – Triple Rotor :Drive Axle To Transaxle (M 10 X 1.50 Allen Bolt) :
59 Ft-Lbs \ 708 In-Lbs \ 79.99 N-m

AWD Drive Shaft CV Joint Bolts :Drive Shaft To Differental Assembly (Hexagon Bolt) :
41 Ft-Lbs \ 492 In-Lbs \ 55.59 N-m

AWD Drive Shaft CV Joint Bolts :Drive Shaft To Transfer Case Assembly (Hexagon Bolt) :
41 Ft-Lbs \ 492 In-Lbs \ 55.59 N-m

FRONT :Drop Link To Control Arm-Lower (Nut) :
30 Ft-Lbs \ 360 In-Lbs \ 40.67 N-m

FRONT Ball Joint :Drop Link To Anti Roll/Stabilizer Bar (Nut) :
74 Ft-Lbs \ 888 In-Lbs \ 100.33 N-m

FRONT Bushing :Drop Link To Anti Roll/Stabilizer Bar (Nut) :
30 Ft-Lbs \ 360 In-Lbs \ 40.67 N-m + 90deg

REAR – AWD :Drop Link To Anti Roll/Stabilizer Bar (Bolt – Nut) :
37 Ft-Lbs \ 444 In-Lbs \ 50.17 N-m

REAR – AWD :Drop Link To Rear Knuckle (Bolt – Nut) :
37 Ft-Lbs \ 444 In-Lbs \ 50.17 N-m

MANUAL Transaxle Fill Plug (Hexagon Bolt) :
18 Ft-Lbs \ 216 In-Lbs \ 24.4 N-m

Hub To Drive Axle (14mm Hexagon Bolt) :
85 Ft-Lbs \ 1020 In-Lbs \ 115.24 N-m + 180deg

Hub To Drive Axle (16mm Hexagon Bolt) :
140 Ft-Lbs \ 1680 In-Lbs \ 189.81 N-m + 180deg

AUTOMATIC Transaxle Mount :Mount To Transaxle :
30 Ft-Lbs \ 360 In-Lbs \ 40.67 N-m

AUTOMATIC Transaxle Mount :Mount To Subframe :
17 Ft-Lbs \ 204 In-Lbs \ 23.05 N-m

FRONT Upper Control Arm Mount to Body :Mount To Body (Hexagon Bolt) :
55 Ft-Lbs \ 660 In-Lbs \ 74.57 N-m

REAR – 2WD – Axle Mount :Mount To Body (Hexagon Bolt) :
55 Ft-Lbs \ 660 In-Lbs \ 74.57 N-m

REAR – AWD – UPPER Control Arm/Damper Mount :Mount To Body (Hexagon Bolt) :
41 Ft-Lbs \ 492 In-Lbs \ 55.59 N-m

AUTOMATIC Transaxle Mount Center Boly – Mount To Mount (Bolt – Nut) :
30 Ft-Lbs \ 360 In-Lbs \ 40.67 N-m

Power Brake Booster To Firewall (Hexagon Bolt) :
18 Ft-Lbs \ 216 In-Lbs \ 24.4 N-m

Power Steering Hose To Steering Gear – Pressure Line – Hollow Bolt (Banjo) (Hexagon Bolt) :
30 Ft-Lbs \ 360 In-Lbs \ 40.67 N-m

Power Steering Hose To Steering Gear – Return Line – Hollow Bolt (Banjo) (Hexagon Bolt) :
37 Ft-Lbs \ 444 In-Lbs \ 50.17 N-m

REAR – AWD – Lower Back Track Rod :Radius/Track Arm To Subframe (Bolt – Nut) :
66 Ft-Lbs \ 792 In-Lbs \ 89.48 N-m

REAR – AWD – Lower Back Track Rod :Radius/Track Arm To Rear Knuckle (Bolt – Nut) :
37 Ft-Lbs \ 444 In-Lbs \ 50.17 N-m

REAR – 2WD – Stub Axle :Spindle To Trailing Arm (Hexagon Bolt) :
22 Ft-Lbs \ 264 In-Lbs \ 29.83 N-m

Steering Gear To Subframe (Hexagon Bolt) :
48 Ft-Lbs \ 576 In-Lbs \ 65.08 N-m

Subframe To Body Mounting Bolts (Hexagon Bolt) :
81 Ft-Lbs \ 972 In-Lbs \ 109.82 N-m + 90deg

Tie Rod End To Steering Knuckle Clamp Nut & Bolt (Bolt – Nut) :
33 Ft-Lbs \ 396 In-Lbs \ 44.74 N-m

Tie Rod End To Steering Knuckle Vertical Bolt (Hexagon Bolt) :
5 Ft-Lbs \ 60 In-Lbs \ 6.78 N-m

AWD :Torque Tube To Differental Assembly (Hexagon Bolt) :
26 Ft-Lbs \ 312 In-Lbs \ 35.25 N-m

Transaxle To Engine Block (M 10 X 1.50 Hexagon Bolt) :
33 Ft-Lbs \ 396 In-Lbs \ 44.74 N-m

Transaxle To Engine Block (M 12 X 1.50 Hexagon Bolt) :
48 Ft-Lbs \ 576 In-Lbs \ 65.08 N-m

Tags: , , , , ,
No Comments »

by admin

How To Reset OIL or INSP message in Audi A4 B5 (1994 to 2001)

January 6, 2015 in Audi A4, Audi A4 B5 (1994 to 2001), Service Indicator Reset by admin

audi_a4_b5_oil_service_light_reset

For reset the OIL message that appears in your Audi A4 B5 dash panel odometer screen, follow the instructions:

 For 1994 to 1999 cars:

Step 1. Insert your key into the ignition (do not turn it)
Step 2. Push in the odometer reset button (right button), hold it pressed, and turn the key to the first click.
Step 3. In the display, “oil” or “service” or “insp” should now be shown. If it does not, repeat steps 1. and 2.
Step 4. To reset, pull out your instrument light dimmer button at the bottom of the tachometer. (—— are now displayed)
Step 5. Turn the ignition to the off position. When the ignition is turned back on, the display should be back to the trip odometer.

For 2000 to 2001 cars:

Step 1. Insert your key into the ignition (do not turn it)
Step 2. Push in the odometer reset button (right button), hold it pressed, and turn the key to the first click.
Step 3. In the display, “oil” or “service” or “insp” should now be shown. If it does not, repeat steps 1. and 2.
Step 4. To reset, push the clock adjustment knob the bottom of the tachometer.(—— are now displayed)
Step 5. Turn the ignition to the off position. When the ignition is turned back on, the display should be back to the trip odometer.

The instructions in this tutorial will work in the following model years:

1994, 1995, 1996, 1997, 1998, 1999, 2000 and 2001 Audi A4 B5 Petrol (1.6, 1.8, 1.8T, 2.4 v6, 2.8 v6) and Diesel (1.9 TDI and 2.5 TDI) Engines, S4 and RS4

No Comments »

by admin

How To Service Message Reset in Audi A4 B6 (2000 to 2006)

June 4, 2014 in Audi A4, Audi A4 B6 (2000 to 2006), Service Indicator Reset by admin

For reset the “SERVICE” or “SERVICE IN … ” message indicator that appears in your Audi A4 B6, Sedan, Avant or Cabriolet dash instrument cluster center screen, follow the instructions:

Step 1.  Press and hold the service button (button with a spanner icon on it).
Step 2. Turn on the ignition, with the service button still pressed.
Step 3. When Service appears again in the screen, press the “0,0”audi_a4_b6_service_light_reset button until the display resets and shows —.

And that’s it, your service message indicator should be off and a new service interval has been set.

The instructions in this tutorial will work in the following model years:

  • 2000, 2001, 2002, 2003, 2004, 2005 and 2006 Audi A4 B6 Petrol (1.6, 1.8, 2.0, 2.4 and 3.0) and Diesel Engines (1.9 TDI and 2.5 TDI) and S4.

Tags: , ,
No Comments »

Next Entries →